Aluminum Extrusions - Other

  • Steel Stitch™ Corporation supplies the industry's widest selection of awning-specific aluminum extrusion profiles. Each component is manufactured from the finest raw materials available. Each profile is extruded from non-recycled ingots according to the standards set forth by the American Society for Testing & Materials (ASTM). We accept no substitutions in quality, and the result is trouble free bending, welding and stapling.
Click for Where to Buy Steel Stitch Products!
SMP-3CW 1/10" Wall Flanged Tube with
exclusive retaining tabs.
1"x 2 1/2"x 1/10" wall flanged tube with upper flanges. Member is most commonly used to fabricate intermediate out-bars or runners for awnings and canopies with ceiling tiles. Upper flanges prevent ceiling panels from being blown out by the wind.

Tri Vantage Item #250070
JB Item #535000310
Steel Stitch #: SMP-3CW
Length: 20-lin.ft.
Standard Pack:
10 pcs/bundle
Ship Weight:
152-lb, approx.

SMP-3DW 1/16" Wall Flanged Tube
with exclusive retaining tabs
1"x 2 1/2"x 1/16" wall flanged tube with upper flanges. Member is most commonly used to fabricate intermediate out-bars or runners for awnings and canopies with ceiling panels. Upper flanges prevent ceiling panels from being blown out by the wind.

Tri Vantage Item #250072
JB Item #535000311
Steel Stitch #: SMP-3DW
Length: 20-lin.ft.
Standard Pack:
10 pcs/bundle
Ship Weight:
100-lb, approx.

SMP-3CP 1/10" Wall Flanged Tube for
ceiling tile support
1"x 2 1/2" x 1/10" wall flanged tube. Most commonly used to fabricate intermediate out-bars or runners for awnings and canopies with ceiling panels.

Tri Vantage Item #250068
JB Item #535000309
Steel Stitch #: SMP-3CP
Length: 20-lin.ft.
Standard Pack:
10 pcs/bundle
Ship Weight:
126-lb, approx.

SMP-11D .090" Lightweight "Tee" Support
for ceiling panels
7/8"x 1 3/4"x 1/16" flanged tee. Most commonly used to fabricate intermediate out-bars or runners for awnings and canopies with ceiling panels. Designed to be used with SMP-2D and SMP-5D profiles.

Tri Vantage Item #250098
JB Item #535000312
Steel Stitch #: SMP-11D
Length: 20-lin.ft.
Standard Pack:
10 pcs/bundle
Ship Weight:
43-lb, approx.

SMP-4B 1/8" Square Tube with
smooth corner radii
1"x 1" x 1/8" bracing member generally used in spans ranging from 42" to 48". Most commonly used to fabricate structural braces such as intermediate down bars, out-bars, back-bars and components for trusses. Smooth corner radii are ideal for direct contact with fabric panels. SMP-4B is also frequently used to fabricate intermediate rafters.

Tri Vantage Item #250074
JB Item #535000324
Steel Stitch #: SMP-4B
Length: 20-lin.ft.
Standard Pack:
10 pcs/bundle
Ship Weight:
106-lb, approx.

SMP-4C 1/10" Square Tube with
smooth corner radii
1"x 1" x 1/10" bracing member generally used in spans ranging from 36" to 42". Most commonly used to fabricate structural braces such as intermediate down bars, out-bars, back-bars and components for trusses. Smooth corner radii are ideal for direct contact with fabric panels. SMP-4C is also frequently used to fabricate intermediate rafters.

Tri Vantage Item #250076
JB Item #535000313
Steel Stitch #: SMP-4C
Length: 20-lin.ft.
Standard Pack:
10 pcs/bundle
Ship Weight:
88-lb, approx.

SMP-4D 1/16" Square Tube with
smooth corner radii
1"x 1" x 1/16" bracing member generally used in spans up to 36". Most commonly used to fabricate structural braces such as intermediate down bars, out-bars, back-bars and components for trusses. Smooth corner radii are ideal for direct contact with fabric panels. SMP-4D is also frequently used to fabricate intermediate rafters.

Tri Vantage Item #250080
JB Item #535000320
Steel Stitch #: SMP-4D
Length: 20-lin.ft.
Standard Pack:
10 pcs/bundle
Ship Weight:
61-lb, approx.

SMP-5D Lightweight Square Tube with
smooth corner radii
7/8"x 7/8"x 1/16" bracing member generally used in spans up to 30". Most commonly used to fabricate structural braces such as intermediate down bars, out-bars, back-bars and components for trusses. Smooth corner radii are ideal for direct contact with fabric panels. SMP-5D is also frequently used to fabricate intermediate rafters.

Tri Vantage Item #250082
JB Item #535000327
Steel Stitch #: SMP-5D
Length: 20-lin.ft.
Standard Pack:
10 pcs/bundle
Ship Weight:
50-lb, approx.

SMP-6 3/16"x 1" Bar Stock
 
1"x 3/16" bracing member most commonly used to fabricate built-up stiffeners, braces and spacers. SMP-6 is also used frequently for on-site repairs and splices.

Tri Vantage Item #250084
JB Item #535000326
Steel Stitch #: SMP-6
Length: 20-lin.ft.
Standard Pack:
10 pcs/bundle
Ship Weight:
50-lb, approx.

SMP-7 1/2" Diameter Round Rod
 
1/2" diameter bracing member most commonly used to fabricate spreader bars in dome style awnings

Tri Vantage Item #250086
JB Item #535000325
Steel Stitch #: SMP-7
Length: 20-lin.ft.
Standard Pack:
10 pcs/bundle
Ship Weight:
51-lb, approx.

SMP-10B 4" Diameter Aluminum Post
 
4" o.d. x .0125" wall aluminum tube. Most commonly used to fabricate support columns for patio and walkway canopies.

Tri Vantage Item #250096
JB Item #535000315
Steel Stitch #: SMP-10B
Length: 25-lin.ft.
Standard Pack:
10 pcs/bundle
Ship Weight:
443-lb, approx.

© 2001-2009, Steel Stitch Corp., All Rights Reserved
  Screen last modified 12 October 2009