SMP-1A	3/16" Sidewall Main-Frame with Staple-In Channel
	1" x 1" x 3/16" wall staple-in member generally used in spans ranging from 42" to 48". Most commonly used to fabricate top-bars, front bars, panel edges, and rafters that are laterally supported against fabric pre-tension at a maximum of 48" o.c. Tri Vantage Item #250050 JB Item #535000300	Steel Stitch #: SMP-1A Length: 25-lin.ft. Standard Pack: 10 pcs/bundle Ship Weight: 148-lb, approx.

SMP-1B	1/8" Sidewall Main-Frame with Staple-In Channel
	1"x 1" x 1/8" wall staple in member generally used in spans ranging from 36" to 42". Most commonly used to fabricate top-bars, front bars, panel edges, and rafters that are laterally supported against fabric pre-tension at a maximum of 42" o.c. Tri Vantage Item #250052 JB Item #535000301	Steel Stitch #: SMP-1B Length: 25-lin.ft. Standard Pack: 10 pcs/bundle Ship Weight: 122-lb, approx.

SMP-1C	1/10" Sidewall Main-Frame with Staple-In Channel
	1"x 1" x 1/10" wall staple in member generally used in spans up to 36". Most commonly used to fabricate top bars, front bars, panel edges, and rafters that are laterally supported against fabric pre-tension at a maximum of 36" o.c. Tri Vantage Item #250054 JB Item #535000302	Steel Stitch #: SMP-1C Length: 25-lin.ft. Standard Pack: 10 pcs/bundle Ship Weight: 105-lb, approx.

SMP-1CD	.090" Sidewall Main-Frame with Staple-In Channel
	1" x1" x .090" wall staple-in member generally used in spans up to 34". Most commonly used to fabricate top-bars, front bars, panel edges, and rafters that are laterally supported against fabric pre-tension at a maximum of 30"o.c. Typically used for interior or smaller residential projects. Tri Vantage Item #250055 JB Item #535000331	Steel Stitch #: SMP-1CD Length: 25-lin.ft. Standard Pack: 10 pcs/bundle Ship Weight: 90-lb, approx.

SMP-1D	1/16" Sidewall Main-Frame with Staple-In Channel
	1"x 1" x 1/16" wall staple in member generally used in spans up to 32". Most commonly used to fabricate top bars, front bars, panel edges, and rafters that are laterally supported against fabric pre-tension at a maximum of 32" o.c. Tri Vantage Item #250056 JB Item #535000303	Steel Stitch #: SMP-1D Length: 25-lin.ft. Standard Pack: 10 pcs/bundle Ship Weight: 77-lb, approx.

SMP-8B	1" x 2" Extended Main Frame with Staple-in Channel
	1"x 2" x 1/8" wall staple-in member generally used in spans ranging from 48" to 96". Most commonly used to fabricate top-bars, panel edges, and rafters that are laterally supported against fabric pre-tension at a maximum of 48"o.c. (weak axis perpendicular to plane of fabric pre-tension) and 96"o.c. (strong axis perpendicular to plane of fabric pre-tension). Tri Vantage Item #250088 JB Item #535000304	Steel Stitch #: SMP-8B Length: 25-lin.ft. Standard Pack: 10 pcs/bundle Ship Weight: 220-lb, approx.

SMP-8C	1" x 2" Extended Main Frame with Staple-in Channel
	1"x 2" x 1/10" wall staple-in member generally used in spans ranging from 48" to 84". Most commonly used to fabricate top-bars, panel edges, and rafters that are laterally supported against fabric pre-tension at a maximum of 48"o.c. (weak axis perpendicular to plane of fabric pre-tension) and 84"o.c. (strong axis perpendicular to plane of fabric pre-tension). Tri Vantage Item #250091 JB Item #535000314	Steel Stitch #: SMP-8C Length: 25-lin.ft. Standard Pack: 10 pcs/bundle Ship Weight: 165-lb, approx.

SMP-9B	1" x 4" I-Beam Main Frame with Staple-in Channel
	1"x 4" x 1/8" wall staple-in member generally used in spans ranging from 96" to 144". Most commonly used to fabricate intermediate rafters that are laterally supported against fabric pre-tension at a maximum of 48"o.c. Tri Vantage Item #250092 JB Item #535000305	Stteel Stitch #: SMP-9B Length: 25-lin.ft. Standard Pack: 10 pcs/bundle Ship Weight: 298-lb, approx.

SMP-9BS	1" x 4" I-Beam Main Frame with Side Staple-in Channel
	1"x 4" x 1/8" wall staple-in member generally used in spans ranging from 96" to 144". Most commonly used to fabricate end rafters that are laterally supported against fabric pre-tension at a maximum of 48"o.c. Tri Vantage Item #250094 JB Item #535000323	Steel Stitch #: SMP-9BS Length: 25-lin.ft. Standard Pack: 10 pcs/bundle Ship Weight: 297-lb, approx.

SMP-15B	1½" x 1½" Oversized Main Frame with Staple-in Channel
	1½" x 1½" x 1/8" wall staple-in member generally used in larger spans. Most commonly used to fabricate top truss cords, top-bars, front bars, panel edges and rafters. Square shape provides near equal strength in both the x and y axis, reducing the amount of required bracing for both wind and snow loads, and lateral bracing against fabric tension. Build larger fabric structures with cleaner, less cluttered looking frames, and do so at reduced labor cost. Tri Vantage Item # 250097 JB Item # 535000330 Click Here for more detail on this product (PDF file)	Steel Stitch #: SMP-15B Length: 25-lin.ft. Standard Pack: 6 pcs/bundle Ship Weight: 126-lb, approx.

SMP-22B	2" x 2" Massive Main Frame with Staple-in Channel
	2" x 2" x 1/8" wall staple-in member generally used in spans ranging from 60" to 108". Most commonly used to fabricate top truss cords, top-bars, front bars, panel edges, and rafters. Square shape provides near equal strength in both the x and y axis, reducing the amount of required bracing for both wind and snow loads, and lateral bracing against fabric tension. Build larger fabric structures with cleaner, less cluttered looking frames, and do so at reduced labor cost. Tri Vantage Item #250099 JB Item #535000332	Steel Stitch #: SMP-22B Length: 25-lin.ft. Standard Pack: 5 pcs/bundle Ship Weight: 153-lb, approx.

9125RBA	1¼" Round Anodized Tube for Boat Tops & Biminis
	Bright dip anodized for a polished look and maximum corrosion resistance. Similar strength charateristics to 1-1/4" diameter, 16 gauge stainless steel and 1-1/4" diameter, 1/8" sidewall aluminum. The staple channel opening is the same as all Steel Stitch extrusions, ensuring compatibility with Steel Stitch Fabric ZipStrip and PVC ZipStrip. Tri Vantage Item #250046 Click Here for more detail on this product (PDF file)	Steel Stitch #: 9125RBA Length: 25-lin.ft. Standard Pack: Min. 1 pc./bundle Ship Weight: 18.25-lb/pc.

SMP-2B	1/8" Sidewall Egg Crate Support with Bottom Staple Channel
	1" x 1-3/4" x 1/8" wall staple-in member generally used in spans up to 48". Most commonly used to fabricate back-bars, front bars, valance bars and end out-bars with drop in ceiling panels. SMP-2B must be laterally supported against fabric pre-tension at a maximum of 48"o.c. Stapling channel faces down to conceal lower front edge of the member when used as a front-bar or valance bar. Tri Vantage Item #250058 JB Item #535000306	Steel Stitch #: SMP-2B Length: 25-lin.ft. Standard Pack: 10 pcs/bundle Ship Weight: 124-lb, approx.

SMP-2BS	1/8" Sidewall Egg Crate Support with Side Staple Channel
	1" x 1-3/4" x 1/8" wall staple-in member generally used in spans up to 48". Most commonly used to fabricate back-bars, front bars, valance bars and end out-bars with drop in ceiling panels. SMP-2BS must be laterally supported against fabric pre-tension at a maximum of 48"o.c. Stapling channel faces out to allow a loose valance to be installed when member is used as a front-bar or valance-bar. Tri Vantage Item #250062 JB Item #535000307	Steel Stitch #: SMP-2BS Length: 25-lin.ft. Standard Pack: 10 pcs/bundle Ship Weight: 145-lb, approx.

SMP-2C	1/10" Sidewall Egg Crate Support with Bottom Staple Channel
	1" x 1-3/4" x 1/10" wall staple-in member generally used in spans up to 36". Most commonly used to fabricate back-bars, valance bars and end out-bars with drop in ceiling panels. SMP-2C must be laterally supported against fabric pre-tension at a maximum of 36"o.c. Stapling channel faces out to allow a loose valance to be installed when member is used as a front-bar or valance bar. Tri Vantage Item #250064 JB Item #535000308	Steel Stitch #: SMP-2C Length: 25-lin.ft. Standard Pack: 10 pcs/bundle Ship Weight: 115-lb, approx.

SMP-2D	1/16" Sidewall Egg Crate Support with Bottom Staple Channel
	1" x 1-3/4" x 1/16" wall staple-in member generally used in spans up to 30". Most commonly used to fabricate back-bars, valance bars and end out-bars with drop in ceiling panels. SMP-2D must be laterally supported against fabric pre-tension at a maximum of 30"o.c. Stapling channel faces out to allow a loose valance to be installed when member is used as a front-bar or valance bar. Tri Vantage Item #250066 JB Item #535000316	Steel Stitch #: SMP-2D Length: 25-lin.ft. Standard Pack: 10 pcs/bundle Ship Weight: 90-lb, approx.